[1] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Phenomenological Improvements to Predictive Models of Fiber Orientation in Concentrated Suspensions.” J Rheol 57 1597-1631 (2013).
https://sor.scitation.org/doi/10.1122/1.4821038
[2] Foss, P. H., H.-C. Tseng, J. Snawerdt, Y.-J. Chang, W.-H. Yang, and C.-H. Hsu, “Prediction of Fiber Orientation Distribution in Injection Molded Parts Using Moldex3d Simulation.” Polym Compos 35 671-680 (2014).
https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.22710
[3] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “An Objective Tensor to Predict Anisotropic Fiber Orientation in Concentrated Suspensions.” J Rheol 60 215-224 (2016).
https://sor.scitation.org/doi/10.1122/1.4939098
[4] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Numerical Prediction of Fiber Orientation and Mechanical Performance for Short/Long Glass and Carbon Fiber-Reinforced Composites.” Compos Sci and Technol 144 51-56 (2017).
https://www.sciencedirect.com/science/article/pii/S0266353816318802
[5] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Improved Fiber Orientation Predictions for Injection Molded Fiber Composites.” Composites Part A: Applied Science and Manufacturing 99 65-75 (2017).
https://www.sciencedirect.com/science/article/pii/S1359835X17301537
[6] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “An Integration of Microstructure Predictions and Structural Analysis in Long-Fiber-Reinforced Composite with Experimental Validation.” Int Polym Process 32 455-466 (2017).
https://www.hanser-elibrary.com/doi/abs/10.3139/217.3377
[7] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “The Use of Shear-Rate-Dependent Parameters to Improve Fiber Orientation Predictions for Injection Molded Fiber Composites.” Composites Part A: Applied Science and Manufacturing 104 81-88 (2017).
https://www.sciencedirect.com/science/article/pii/S1359835X17303974
[8] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Numerical Predictions of Fiber Orientation and Mechanical Properties for Injection-Molded Long-Glass-Fiber Thermoplastic Composites.” Compos Sci and Technol 150 181-186 (2017).
https://www.sciencedirect.com/science/article/pii/S0266353817308242
[9] Favaloro, A. J., H.-C. Tseng, and R. B. Pipes, “A New Anisotropic Viscous Constitutive Model for Composites Molding Simulation.” Composites Part A: Applied Science and Manufacturing 115 112-122 (2018).
https://www.sciencedirect.com/science/article/pii/S1359835X18303816
[10] Huang, C.-T. and H.-C. Tseng, “Simulation Prediction of the Fiber Breakage History in Regular and Barrier Structure Screws in Injection Molding.” Polym Eng Sci 58 452-459 (2018).
https://onlinelibrary.wiley.com/doi/abs/10.1002/pen.24660
[11] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Accurate Predictions of Fiber Orientation and Tensile Modulus in Short-Fiber-Reinforced Composite with Experimental Validation.” Polym Compos 39 2847-2859 (2018).
https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.24277
[12] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Numerical Predictions of Fiber Orientation for Injection Molded Rectangle Plate and Tensile Bar with Experimental Validations.” Int Polym Process 33 96-105 (2018).
https://www.hanser-elibrary.com/doi/abs/10.3139/217.3404
[13] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Numerical Predictions of Fiber Orientation and Mechanical Properties for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites.” Polym Compos 39 3726-3739 (2018).
https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.24403
[14] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Effect of the Packing Stage on Fiber Orientation for Injection Molding Simulation of Fiber-Reinforced Composites.” J Thermoplast Compos Mater 31 1204-1218 (2018).
https://journals.sagepub.com/doi/abs/10.1177/0892705717734605
[15] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Predictions of Fiber Concentration in Injection Molding Simulation of Fiber-Reinforced Composites.” J Thermoplast Compos Mater 31 1529-1544 (2018).
https://journals.sagepub.com/doi/abs/10.1177/0892705717738302?journalCode=jtca
[16] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “The Use of Principal Spatial Tensor to Predict Anisotropic Fiber Orientation in Concentrated Fiber Suspensions.” J Rheol 62 313-320 (2018).
https://sor.scitation.org/doi/10.1122/1.4998520
[17] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Numerical Investigations of Fiber Orientation Models for Injection Molded Long Fiber Composites.” Int Polym Process 33 543-552 (2018).
https://www.hanser-elibrary.com/doi/abs/10.3139/217.3550
[18] Tseng, H.-C., M. Goto, R.-Y. Chang, and C.-H. Hsu, “Accurate Predictions of Fiber Orientation and Mechanical Properties in Long-Fiber-Reinforced Composite with Experimental Validation.” Polym Compos 39 3434-3445 (2018).
https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.24361
[19] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Comparison of Recent Fiber Orientation Models in Injection Molding Simulation of Fiber-Reinforced Composites.” J Thermoplast Compos Mater (2018, First Published, https://journals.sagepub.com/doi/pdf/10.1177/0892705718804599).
https://journals.sagepub.com/doi/abs/10.1177/0892705718804599?journalCode=jtca
[20] Huan-Chang Tseng, “ Jeffery’s orbit leading to the foundation of flow-induced orientation in modern fiber composite materials”, Journal of Non-Newtonian Fluid Mechanics (Nov. 2022)
https://www.sciencedirect.com/science/article/abs/pii/S0377025722001458
- Enhanced Structure CAE Solution with Molding Effect for Automotive Parts
- Integrated Numerical Simulation of Injection Molding Using True 3D Approach
- Parallel True 3D CAE with Hybrid Meshing Flexibility for Injection Molding
- Seamless Integration of Injection Molding and Structure Analysis Tools
- Three-Dimensional Insert Molding Simulation in Injection Molding
- True 3D CAE Visualization of Filling Imbalance in Geometry-Balanced Runners
- Factors Influencing the Warpage in In-Mold Decoration Injection Molded Composites
- Investigation on Warpage and Its Behavior in Sequential Overmolding.
- Numerical Simulation and Moldability Investigation of Micro-Features
- Simulation and Verification on Part Surface Quality Using External Gas-assisted Injection Molding Process
- Simulating the Melting Behavior and Melt Temperature Inhomogeneity in The Injection Molding Process
- The Investigation of Flow Behavior of Polymeric Melts in the Water Assisted Injection Molding
- Three-Dimensional Simulation of Multi-Shot Sequential Molding
- The Investigation of Warpage Behavior by Considering the Process-Induced Property Variation in Sequential Overmolding
- Simulating Polyurethane (PU) Reactive Injection Molding Process
- The Effects of Various Variotherm Processes and Their Mechanisms on Injection Molding
- An investigation on the temperature behavior in mold embedded with heater
- Improve Cooling Effect of Injection Molding by Pulsed-Cooling Method
- Integrated simulation of the Rapid Heat Cycle Molding process
- Simulation and Verification Mold Temperature Variation of Pulsed-Cooling
- Thermal Feature of Variotherm Mold in Injection Molding Processes
- 3D Numerical Simulation Investigating the Effect of Volumetric Flow Rate on Core Deflection
- Dynamic Property of The Frozen-Layer and Its Effects on Warpage in Injection Molded Parts
- Effects of Melt Rotation on Warpage Phenomena in Injection Molding
- Melt Memory and Core Deflection
- Warpage Management Using Three Dimensional Thickness Control Method in Injection Molding